Specialty Concrete

World Leading Variety Of Concrete Products From A Single Mixer

In addition to producing all exposure classes of general concrete, Omni-Mixing Technology also produces a number of specialty concretes as well.

Low and Ultra low density fill and Cellular concrete - 0.1 MPa to 12 MPa ultra fill, insulating materials up to 80% air
Poly-fibre reinforcing
Chemical Resistant Concrete - Including type GU, MS, HS, HSb and HSe hydraulic cements
Shotcrete
Low shrinkage co-efficient materials

High Early accelerating mix designs, designed to meet project specifications
Cement-stabalized bases
Slip-form paved concrete
Decorative concrete
Eco-friendly concrete (>60% lower emissions)
Specialty mix designs and custom applications

We Are The Leading Solutions Provider For Complex and Creative Concrete Projects

We thrive where others struggle.

Omni-Mixing Technology is extremely competitive and outperforms in markets where long-standing multinational brick-and-mortar plants are. In some instances, even taking over 80% of market share. Taking 90% of large commercial projects in some markets from multinational batch plants.

But where we truly shine is in the projects that are hard to do. The specialty concrete projects, the eco-friendly concrete projects, and the remote projects.

We Are The Leading Solutions Provider For Complex and Creative Concrete Projects

Remote Concrete Projects

Our completely mobile technology allows for high-quality fresh concrete regardless of the location. Meaning even rapid-setting concretes can be provided to remote locations. And since it’s fresh, it requires less chemicals. Which means more predictable concrete: even hundreds of miles away.

But it doesn’t stop there… because it utilizes continuous mixing technology, ONE mixer mixing continuously at up to 70-100+ m3/hour can easily outperform entire batch plants with dozens of drum trucks. Requiring a very small area and almost no time to mobilize to do massive projects.

And as you can see, this one mixer can meet all your concrete needs. (roads, parking lots, high performance concrete, mass pours, flow-able fills, cellular concrete, etc.)

Mobility Matters

To produce the same 10,000m3 of concrete using the exact same materials (with Portland Cement) as a local batch plant for a mass concrete project (assumes 20-30 mins from the project with 7m3 drums), Omni-Mixing Technology would:

Use just 2 mixers to reach 160m3 per hour of continuous production
7 mix designs just for the slope of the pool. Many more mix designs requested to meet entire project scope: including pilings, foundations, suspended slabs, extra flat slabs, exterior concrete, slip form paved concrete, and decorative concrete
Use only 0.2% of the water, 2.5% of the diesel fuel, and creates only 0.6% of the CO2
Have no risk of detrimental temperature gain... imperative for mass concrete
Use only 13% of the man hours
Have unmatched consistency and quality, with 0 rejected loads and 100% performance on all third-party testing

Mobility Matters

Use just 2 mixers to reach 160m3 per hour of continuous production
7 mix designs just for the slope of the pool. Many more mix designs requested to meet entire project scope: including pilings, foundations, suspended slabs, extra flat slabs, exterior concrete, slip form paved concrete, and decorative concrete
Use only 0.2% of the water, 2.5% of the diesel fuel, and creates only 0.6% of the CO2
Have no risk of detrimental temperature gain... imperative for mass concrete
Use only 13% of the man hours
Have unmatched consistency and quality, with 0 rejected loads and 100% performance on all third-party testing

Ready To Build Better Concrete?

As wholehearted concrete enthusiasts, we’re ready to answer your burning questions about our mixing technology or the concrete it produces. We’d love to hear from you.